The Victron Orion 110/24-15A is a galvanically isolated DC-DC converter rated at 360W. It steps down a 110V DC input to a regulated 24V DC output at up to 15A, with full electrical separation between the two circuits.

Key features

• Isolation, galvanic isolation between input and output circuits
• Input, 110V DC nominal
• Output, 24V DC at up to 15A, 360W continuous
• Weight, 1.43kg
• SKU, ORI110243610

Product overview

Galvanic isolation sets this converter apart from non-isolated DC-DC units. There is no direct electrical path between the input and output sides, so faults or noise on the 110V supply cannot reach the 24V load. This matters in industrial and transport settings where the input source may see voltage spikes or ground loop issues.

At 360W continuous output, the Orion 110/24-15A can handle 24V battery charging, auxiliary loads, or control systems fed from a 110V DC bus. The regulated output stays stable through minor input fluctuations. Victron's Orion range is used by professional installers across marine, vehicle and off-grid industrial installations.

Applications

• Stepping down a 110V DC bus to 24V for auxiliary loads or battery charging in industrial systems
• Vehicle and transport installations requiring input/output circuit isolation
• Off-grid power systems using 110V DC battery banks with 24V load circuits
• Marine installations needing isolated DC conversion between voltage systems
• Telecom and control panel setups with mixed DC voltage architectures

What's in the box

• 1x Victron Orion 110/24-15A (360W) Isolated DC-DC Converter

Installation notes

Fit this converter with a qualified electrician or experienced systems integrator. Working with 110V DC systems carries significant electrical hazard. Fuse both input and output circuits correctly, allow adequate ventilation around the unit, and use wiring rated for the voltages and currents involved. Check compatibility with your input source and load requirements before installation.