The Victron 12/1600 230V VE.Direct is a pure sine wave inverter that converts 12V DC battery power into 230V AC mains-compatible output. It suits off-grid installations, vehicle conversions, marine systems and backup power setups where a dependable AC supply is needed from a 12V battery bank. A VE.Direct port allows direct communication with compatible Victron monitoring equipment.

Key features of the Victron 12/1600 inverter

• Output, 1600W continuous AC from a 12V DC input, at 230V AC compatible with UK and European appliances.
• Waveform, pure sine wave output, suitable for sensitive electronics, motors and compressors.
• Communication, VE.Direct port for connection to Victron GX devices, the VE.Direct Bluetooth Smart dongle, or a compatible MPPT solar charge controller.
• Weight, 8.82 kg, compact enough for confined spaces such as vehicle bays or marine cabinets.
• Protection, built-in over-temperature, overload and low battery voltage shutdown.
• Plug, UK configuration included, ready for standard British sockets.

Applications

Off-grid cabins and remote buildings running from a 12V battery bank charged by solar or wind. Motorhome, campervan and caravan conversions needing 230V AC from a leisure battery. Marine installations powering 230V AC loads from a 12V DC system. Backup power for critical loads during grid outages, used alongside a separate battery and charger. Mobile work vehicles needing 230V AC for tools without access to shore power.

Technical specifications

What's in the box

• Victron Inverter 12/1600 230V VE.Direct (UK plug configuration)

Installation notes

This inverter operates at 12V DC and draws high DC currents at full load, so correct cable sizing and fusing on the DC side is essential and must comply with the relevant wiring regulations. Installation should be carried out by a qualified electrician or experienced installer familiar with DC power systems. For off-grid solar installations, connection to the battery bank and any associated solar charge controllers should follow Victron's published system design guidelines. This unit is not grid-tied and does not require G98 or G99 compliance. Ensure adequate ventilation around the unit to prevent thermal shutdown under sustained load.