A complete 11kW off-grid solar power kit for remote homes, farms, workshops, commercial premises and Type 2 EV charging stations. The system runs fully independently from the grid, combining 15kWh of Pylontech US5000 battery storage with 10 x JA Solar 450W panels for power day and night. Grid or generator connection is supported as an optional backup charging source where available.

Off grid solar kit key features

• Inverter, Conversol MAX II 11kW single phase off-grid inverter
• Battery storage, 15kWh from 3 x Pylontech US5000, supplied with racks and cables
• Solar panels, 10 x JA Solar 450W monocrystalline bifacial panels
• Backup charging, optional grid or generator connection, no export to the grid
• Monitoring, Solar Assistant platform included
• DC protection, Lynx Power In distributor and Mersen 250A fuse disconnector

Product overview

The system operates independently from the national grid. Solar energy powers connected loads directly, and surplus charges the batteries for use at night or in poor weather. When battery charge runs low and solar generation is insufficient, an optional grid or generator connection tops up the batteries without disrupting supply.

Grid connection, where used, is passive. The system only draws power to top up the batteries, typically overnight during low-tariff periods. It does not export electricity back to the grid, so there is no need for export licences or DNO approval.

Applications

Suited to remote homes and properties without a reliable grid connection, farms and agricultural buildings, workshops and commercial premises off the grid, and Type 2 EV charging stations in off-grid locations. Also fits sites that want solar as the primary source with generator backup.

What's in the box

• 10 x JA Solar 450W monocrystalline bifacial panels
• 1 x Conversol MAX II 11kW off-grid inverter, up to 12,500W PV input
• 3 x Pylontech US5000 batteries with racks and cables, 15kWh total
• Red and black 6mm² solar DC cables, 25 metres total
• Mersen fuse disconnector with 250A fuses
• BMS communication and battery power cables
• Lynx Power In distributor
• Solar Assistant monitoring platform
• PV combiner box with 4 inputs/outputs, expansion-ready
• Ground or flat roof mounting kit

Installation notes

Installation must be carried out by a qualified electrician or solar installer, with correct cable sizing, fusing, earthing and battery communication setup. Grid or generator backup connection must comply with local regulations. Contact us for pre-sales technical support and system sizing.