The Katool KT-P2700 is a hydraulic two-post parking lift rated to 6,600 lb, designed to double garage and shop floor space by storing one vehicle above another. The platform raises to a maximum height of 82.68 in (2,100 mm), lowers to a clearance of just 3.94 in, and is sized for sedans, sport coupes, and most light SUVs and pickups.
It runs on either 110V or 220V single-phase service at 50/60 Hz, so the same lift fits a residential garage circuit or a commercial bay without a power-unit swap. A full lift cycle takes 60–80 seconds; lowering takes 40–60 seconds.
KT-P2700 feature callouts.
Features
6,600 lb lifting capacity for sedans, light SUVs, and most half-ton pickups
Two-post hydraulic design with a single drive cylinder and equalizing chain
110V / 220V dual-voltage motor (50/60 Hz) — fits residential or commercial single-phase service
Mechanical multi-grade locking bar for parked-vehicle holding
24V low-voltage push-button control with key-switch and emergency stop
Photo-sensor on the platform for obstruction detection during descent
Angle-adjusted drive-on ramp for low approach angle
Minimum height of 3.94 in (100 mm) for low-clearance loading
Maximum lifted height of 82.68 in (2,100 mm) — clears most overhead garage doors
Multi-unit linkage option — stations can be lined up side-by-side for valet, dealership, and storage rows
Multi-unit configurations
A single KT-P2700 station occupies 2,657 mm (about 8 ft 8 in) across. Stations can be linked end-to-end without independent end columns, so adding a second station only adds 2,492 mm of width — useful for car dealerships, valet operations, and high-density residential storage.
Linked-station widths for 1 through 8 KT-P2700 units.
All dimensions per Katool factory drawing. Imperial values are converted from millimeters and rounded to one decimal.
KT-P2700 footprint and clearance dimensions.Left elevation, front elevation, and multi-unit footprint.
Power unit and controls
The motor and hydraulic power unit sit at the top of the drive column. The operator works from a separate 24V control box mounted on the column with up, down, and emergency-stop buttons plus a key switch.
Our goal is for every customer to be totally satisfied with their purchase. If this isn't the case, let us know and we'll do our best to work with you to make it right.
Shipping
We will work quickly to ship your order as soon as possible. Once your order has shipped, you will receive an email with further information. Delivery times vary depending on your location.
Manufacturing
Our products are manufactured both locally and globally. We carefully select our manufacturing partners to ensure our products are high quality and a fair value.
