This hybrid solar kit pairs a Solis S6 5kW single phase inverter with a 5.12kWh US5000 LiFePO4 battery and six JA Solar 450W N-Type bifacial panels, giving a 2.7kW PV array for UK homes and small commercial sites. The inverter and battery take up very little space and suit a garage, utility room, or plant room; the battery must be installed indoors or in a dry, sheltered location, as advised by your installer.

Key features

• Inverter, Solis S6 5kW hybrid (S6-EH1P5K-L-PLUS), single phase, WiFi ready
• Battery, 5.12kWh US5000 Pylontech 48V LiFePO4 lithium storage
• Solar array, 6 x JA Solar 450W bifacial black N-Type panels (JAM54D41-450-LB), 2.7kW total
• Placement, compact inverter and battery suited to a garage, utility room, or plant room; the battery must be installed indoors or in a dry, sheltered location
• Grid modes, import, export, controlled export and zero export
• Extras, off peak battery charging support and backup ready operation for essential loads

What's in the box

• 1 x Solis S6 5kW hybrid solar inverter (S6-EH1P5K-L-PLUS), single phase, WiFi ready
• 1 x US5000 Pylontech 5.12kWh 48V lithium battery (LiFePO4)
• 1 x Mersen battery fuse and DC disconnector set
• 6 x JA Solar 450W bifacial black N-Type panels (JAM54D41-450-LB)
• 1 x roof mounting kit for 6 panels
• 1 x 25m solar PV cable 6mm², pre crimped
• 1 x AC combiner box 230Vac with surge protection and energy meter
• 1 x DC solar panel isolator switch

Applications

Built for self consumption and lower electricity costs, this kit suits homeowners and small businesses that want a hybrid system with monitoring through the Solis WiFi platform. The roof mounting kit supplied is for tile roofs; an alternative kit is available on request at no extra cost.

Installation

Professional installation by a qualified electrician is recommended. Protection settings, commissioning and verification should follow local regulations and site requirements. As the inverter is rated above 3.68kW, a G99 application to your local network operator, or an approved export limitation setup, will be required before connection. Your installer can arrange this as part of the installation.