The GX Touch 70 Wall Mount is a bracket for fitting the Victron GX Touch 70 display straight onto a wall or panel, instead of attaching it to a Victron GX device. It suits installations where the display needs its own position for easier viewing or access.

Key features

• Purpose, made for the Victron GX Touch 70 display unit
• Mounting, fixes to a wall or flat surface independently of the GX device
• Weight, 0.15 kg, adding minimal load to the mounting surface
• Use case, gives the touchscreen a fixed position in control rooms, plant rooms or enclosures
• Compatibility, GX Touch 70 (SKU: BPP900465070, GTIN: 8719076054368)

Product overview

Mounting the GX Touch 70 directly onto a Cerbo GX or similar device is not always practical. The display may need to sit at eye level, inside a control panel, or away from the main GX unit altogether. This bracket gives it a secure, fixed point on any flat surface.

It is a factory accessory from Victron Energy, built to fit the GX Touch 70 without modification. Its low weight means it can usually be fixed to standard wall surfaces without specialist fixings, though the installer should check the substrate and use fixings suited to the environment.

Applications

• Wall mounting the GX Touch 70 in residential solar and battery storage installations
• Fixed panel display in off-grid cabins, boats and motorhomes where the GX device sits remotely
• Commercial and industrial energy storage systems needing a dedicated monitoring display position
• Control rooms or plant rooms where the touchscreen must be reachable independently of the inverter or GX unit

What's in the box

• 1 x GX Touch 70 Wall Mount bracket

Installation notes

This bracket should be fitted by a qualified electrician or system integrator familiar with Victron GX installations. Check the mounting surface can take the combined weight of bracket and display, and use fixings appropriate to the wall or panel material. The GX Touch 70 display and its connecting cable are not included and must be bought separately.