The Victron Digital Multi Control 200/200A GX is a remote control panel for Victron MultiPlus and Quattro inverter/chargers, connecting via a right-angle RJ45 plug that suits tight enclosure depths. It lets an installer or operator switch modes and set the AC input current limit without accessing the inverter/charger directly.

Key features for Victron Cerbo GX systems

• Connection, RJ45 connection to Victron MultiPlus and Quattro inverter/chargers via VE.Bus.
• Right-angle plug, reduces the depth needed behind the panel, useful in shallow enclosures and tight cable runs.
• Mode switching, remote selection of Inverter Only, Charger Only and On modes.
• Current limit adjustment, rotary dial sets the AC input current limit up to 200A.
• GX compatible, designed to work alongside GX devices, such as the Cerbo GX, on the same VE.Bus port.
• Weight, 0.178 kg.

Applications

Used on marine vessels to manage shore power from a helm or nav station, in motorhomes and coaches where the inverter/charger sits in a remote bay, and in off-grid cabins with the inverter located in a separate plant room. It suits any VE.Bus installation needing remote mode switching and current limit control, including commercial and specialist vehicle conversions.

Installation notes

Connect using a standard CAT5 RJ45 cable to the VE.Bus port on the MultiPlus or Quattro. If a GX device shares the same VE.Bus port, a VE.Bus RJ45 splitter is needed (sold separately). Fitting should be carried out by a qualified electrician or Victron-trained installer, and this panel must not be connected to non-VE.Bus Victron products.

What's in the box

• 1 x Digital Multi Control 200/200A GX panel with right-angle RJ45 connector