Description:

The STM32F103xC, STM32F103xD and STM32F103xE performance line family incorporates the high-performance ARM® Cortexâ„?M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 512 Kbytes and SRAM up to 64 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer three 12-bit ADCs, four general-purpose 16-bit timers plus two PWM timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2Ss, one SDIO, five USARTs, an USB and a CAN.The STM32F103xx high-density performance line family operates in the â€?0 to +105 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.These features make the STM32F103xx high-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, 

Specification:

• Manufacturer: STMicroelectronics
• Product Category: ARM Microcontrollers - MCU
• Core: ARM Cortex M3
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 72 MHz
• Program Memory Size: 256 KB
• Data RAM Size: 48 KB
• On-Chip ADC: Yes
• Operating Supply Voltage: 2.5 V, 3.3 V
• Maximum Operating Temperature: + 85 C
• Package / Case: LQFP-100
• Mounting Style: SMD/SMT
• A/D Bit Size: 12 bit
• A/D Channels Available: 16
• Interface Type: CAN, I2C, SPI, USART, USB
• Minimum Operating Temperature: 14 mm
• Number of Programmable I/Os: 80
• Number of Timers: 8
• On-Chip DAC: Yes
• Processor Series: STM32
• Program Memory Type: Flash

Features:

• 3.2" TFT LCD Module, 320 * 240 resolution, 26 million color
• Resistive touch screen, with XPT2046 Controller
• 4 LED light, 2 LED indicator
• 4 GPIO buttons
• A RESET Button
• Serial communication interface
• 2 mini-type USB socket, 
• USB to RS232 and USB DeviceUSB Device function
• A JTAG / SWD debug interface (20pin)
• RTC battery
• USB Power Supply
• 1 W5100 Ethernet model
• 1 infrared sensor
• Support USB/UART Download
• All IO extend out for second time development

Package List:

• 1x SainSmart STM32 STM32F103VCT6 Board
• 1x SainSmart 3.2 inch TFT LCD for the ARM board
• 1x W5100 Wiznet Network TCP / IP Ethernet Module 
• 1x USB cable