The Triumph NTB-1200 Electronic Truck Wheel Balancer is a heavy-duty spin balancer built to service everything from over-the-road truck wheels to passenger-car and light-truck rims on a single machine. It balances wheels from 10 to 28 inches in diameter, up to a 51-inch tire diameter, with rim widths from 1.5 to 20 inches and assemblies weighing up to 350 lbs — enough range to cover half-ton through one-ton trucks, box trucks, and over-the-road wheels without keeping a second, smaller balancer on the floor.
A gauge arm reads wheel distance and diameter automatically, so the operator sets fewer parameters before each spin. The 1/3 HP motor completes a balance cycle in about 8 seconds, and the electronic readout resolves imbalance to ±1 gram in standard mode (±10 grams for heavier counterweights). The display switches between standard and metric units, and a protective wheel hood cover ships with the machine to guard the operator and the balancer head.
Features
Truck-to-passenger range — balances 10- to 28-inch wheels up to 350 lbs, covering heavy truck, light truck, and passenger assemblies on one machine.
Automatic distance and diameter measurement — the gauge arm reads wheel distance and diameter automatically; rim width is entered manually.
8-second balance cycle — a 1/3 HP motor spins and reads each wheel in about 8 seconds.
±1 gram resolution — electronic readout resolves imbalance to ±1 gram (±10 grams for heavier weights), in standard or metric units.
Multiple balancing modes — standard dynamic, static, ALU 1–3, ALU-S, and OPT programs for a range of wheel types and weight-placement styles.
Protective cover included — a wheel hood cover ships with the balancer.
Compatibility
The NTB-1200 is rated across the full range of on-highway wheels: passenger cars, half-ton through one-ton trucks, box trucks, and over-the-road truck wheels, including Load Range C, D, and E tires. It balances 14- to 24-inch wheels, 16.5-, 19.5-, and 21.5-inch wheels, implement wheels, and run-flat wheels. Motorcycle wheels fall outside its range.
The NTB-1200 carries a 1-year parts warranty (parts only; labor is not covered). If something fails, call MGS and we troubleshoot by phone, then ship the needed part at no charge — the part and ground shipping are both free. Installing the replacement part is the owner's responsibility. To start a claim, contact sales@mygaragesupplies.com or call 307-381-1810.
Wear items are not covered: the quick-release wing nut, wheel hood cover, top tray cover, and wheel-weight hammer.
FAQ
Does the NTB-1200 measure the wheel automatically?
Distance and wheel diameter are measured automatically by the gauge arm. Rim width is entered manually — the machine does not use fully automatic data entry.
What power does it require?
The balancer runs on standard 110-volt power, so it plugs into a common shop or garage circuit rather than needing high-voltage three-phase service.
How does it ship?
The NTB-1200 ships freight on an LTL common carrier with lift-gate service — the driver lowers it to the ground at the rear of the truck. The driver does not move it inside or assemble it, so plan to move the 720-lb machine into position yourself. You schedule delivery directly with the freight carrier; if you prefer, it can be routed to the carrier's nearest terminal for pickup.
Our goal is for every customer to be totally satisfied with their purchase. If this isn't the case, let us know and we'll do our best to work with you to make it right.
Shipping
We will work quickly to ship your order as soon as possible. Once your order has shipped, you will receive an email with further information. Delivery times vary depending on your location.
Manufacturing
Our products are manufactured both locally and globally. We carefully select our manufacturing partners to ensure our products are high quality and a fair value.
