Micsig Digital Automotive Tablet Oscilloscope TO1004

The Micsig TO series 1004 Flat-Panel Oscilloscope is a compact and powerful tool for engineers on the go. With up to 4 analog channels, 100 MHz bandwidth, and a 1GS/s sampling rate, this oscilloscope offers unparalleled performance.

Serial Bus Decoding and Analysis Support

Supports UART, LIN, CAN, CSPI, and other hardware-based serial bus decoding and triggering, allowing simultaneous display of waveform and data.

Powerful Trigger Functions Support

Features Edge, Pulse, Logic, N Edge, Runt, Slope, Timeout, Video, and Serial triggers, providing intuitive trigger settings and fast source switching.

Hardware Digital Filtering

The TO series includes high pass/low pass filter functions to help engineers eliminate insignificant frequencies, reducing interference and revealing the true state of the signal.

Color Temperature Display

The Color Temperature Display is similar to the intensity-graded trace function, where trace occurrences are represented by different colors. Red indicates more frequent events, while blue indicates less frequent ones.

256-Level Intensity Grading

The TO series features a digital fluorescent display, where intensity-graded traces are brighter for frequently occurring events and dimmer for less frequent occurrences.

• User-Defined Channel Label: Users can set different labels for various sources to facilitate observation and readout.
• Compact form factor: The TO series Tablet Oscilloscope is about 5 cm thick, making it the go-to oscilloscope.
• Built-in 7500mAh Li-ion battery: Supports power-off lock for secure travel.
• Connectivity: Includes power button, grounding plug, probe calibration output, USB 3.0/2.0, HDMI, Type-C, power supply, and power-off lock (Note: switch to ON for first-time use).

The TO series supports PC software and a mobile app (Android/iOS) for remote control via Wi-Fi and USB, enabling internet access for online upgrades. It can also be projected through an HDMI port for training and educational demonstrations.

Technical Specifications

• Invert: Support
• Bandwidth filter: TO1004: 20MHz, high pass/low pass (to 30KHz)
• Coupling: DC, AC, GND
• Input Impedance and Accuracy: TO1004: 1MΩ ±1%
• Vertical divisions: 10 div
• Vertical scale factor: TO1004: 1mV/div ~ 10V/div (1MΩ)
• DC Gain accuracy: 5mV/div ~ 10V/div: ≤ ±2.0%; ≤ 2mV/div: ≤ ±3.0%
• Vertical offset range: (1MΩ/50Ω) ±2.5V (@probe 1X, <500mV/div), ±120V (@probe 1X, ≥500mV/div)
• Noise floor: ≤1.2mVpp (1mV/div, 1MΩ)
• Probe type: Voltage / Current
• Active probe support: Yes
• Probe Auto Identification: Yes
• Probe Attenuation Ratio: 1mX ~ 10kX, 1-2-5 sequence
• Max input voltage: CAT I 300Vrms, 400Vpk (1MΩ), 5Vrms (50Ω)
• Channel isolation: >40dB (≤100MHz), >35dB (>100MHz)
• Waveform expansion: Screen center, channel zero
• Channel selection: Support
• Channel label: Support

What Accessories Are Included?

1. 4 pcs or 2 pcs of 10X standard probes (including grounding nut, grounding crocodile clip, standard rubber plug)
2. Power adapter (12V DC, 4A)
3. Power cord
4. Smart calibration certificate annex
5. Digital User Manual
6. Smart packing list