High-Performance, All-Weather Grab Adhesive for Interior & Exterior Use

EVO-STIK Sticks Like Sh*t All Weather Adhesive is a premium grab adhesive formulated using advanced SMP (Silyl Modified Polymer) technology. Designed to bond virtually anything to anything, it delivers superior initial grab and permanent strength—indoors or outdoors, even on damp surfaces. Its solvent-free formulation ensures a low-odour, user-safe experience.

Key Features & Benefits

• Exceptional Bond Strength: Long-lasting adhesion to a wide variety of substrates
• All-Weather Performance: Can be used in wet and cold conditions
• Temperature Resistant: Withstands -40 °C to +90 °C in service; up to +100 °C short-term
• Paintable: Once fully cured, it can be painted with most water-based paints
• Solvent-Free & Low Odour: Safe for interior applications
• Wide Compatibility: Bonds wood, concrete, brick, plasterboard, stone, metal, glass, ceramic, unbacked mirrors, and some plastics (except PE, PP, PTFE)

Product & Technical Details

• Form: Thixotropic paste
• Colour: Warm white
• Size: 290ml cartridge
• Specific Gravity: 1.5 approx.
• Tensile Strength: 2.05 MPa (20.5 kg/cm²)
• Elongation at Break: ~200%
• Skinning Time: 30–40 minutes
• Full Cure: 24 hours (depending on conditions and bead size)
• Coverage: Approx. 14 m (5mm bead) per cartridge
• Application Temperature: +5 °C to +40 °C
• Service Temperature: -40 °C to +90 °C (brief exposure to +100 °C)
• Storage: Store unopened in dry conditions between +5 °C and +25 °C
• Shelf Life: Up to 18 months from date of manufacture

Suitable Substrates

• Wood, MDF, plasterboard
• Concrete, brick, stone
• Glass, ceramic tiles
• Unbacked mirrors
• Metals
• Some plastics (excluding polyethylene, polypropylene, PTFE)

Application Instructions

1. Ensure surfaces are sound, clean, and free of dust, oil, or loose material
2. Cut cartridge and nozzle to suit bead size and fit into a standard caulking gun
3. Apply 5mm beads to one surface—spacing at 100–150mm for rigid materials or 200–500mm for lightweight boards
4. Press parts firmly together within 10 minutes
5. Support if needed until cured
6. Clean uncured adhesive with white spirit; cured material must be removed mechanically

Limitations & Precautions

• Not suitable for polyethylene (PE), polypropylene (PP), PTFE or bitumen-covered surfaces
• Do not use on mirrors with safety backing film
• Not suitable for areas under constant water immersion
• Do not bond to painted finishes that cannot support mechanical loads

EVO-STIK Sticks Like Sh*t All Weather Adhesive is the go-to grab adhesive for professionals who demand strong, lasting performance in all site conditions—rain or shine.