Features

• Greatly extends scrub & strip cycles while reducing maintenance costs.
• Responds very well to occasional high speed burnishing or low speed spray buffing.
• Superior, long-lasting shine & appearance.
• Stands up to heavy traffic because it is durable & extremely mark/scuff resistant.
• Superior chemical resistance and holds up to routine disinfectant usage.

Directions

1. For best results, floors should be clean and/or old coatings removed and the floor neutralized.
2. Apply finish in full uniform coats using a clean finish mop.
3. Allow to dry before recoating (30-45 minutes per coat).
4. For maximum performance, apply additional coats of finish until the desired level of appearance and protection is achieved. Do not exceed 5 coats in 24 hours.
5. Clean the floor using a neutral pH cleaner with a mop or auto scrubber.
6. Allow to dry thoroughly before reopening up the area for traffic.
7. High speed burnish if desired with a medium aggressive pad or low speed buff with a white pad.

How to Properly Maintain 'Ideal Low Maintenance'

• Floors should be mopped or swept daily to remove abrasives.
• Damp mop with a neutral cleaner as necessary.
• Worn traffic areas may be recoated with excellent results.
• To prolong the period between complete stripping & recoating, the use of a floor rejuvenator like 'Restore' is recommended.

Notes

• Do not pour unused finish back into the original container, as it will damage the product. These chemicals are intended for use by trained maintenance personnel only.
• This floor finish is not intended for use in households, or on ceramic tiles with a glazed finish.