The Atlas Garage PRO9000 combo pairs the highest-capacity lift in the Atlas Garage PRO series with two RJ-45A rolling bridge jacks — turning a portable storage and service four-post into a rolling wheel-and-brake station. The lift is rated 9,000 lbs; each RJ-45A jack is rated 4,500 lbs. Together they handle everything from a Smart Car to a diesel dually.
The PRO9000 runs on standard 110V power (30-amp breaker required), is free-standing — no anchoring required — and rolls on an included caster kit so it can move when the floor plan changes. The runways are extra-long to fit longer-wheelbase vehicles, and extra-wide so full-size duallys can drive on without their tires riding the runway edges. Extra column height makes it possible to park anything from a Smart Car to a dually both below and on the runways.
Extra-long 17-foot runways (18'11½" with approach ramps).
The two RJ-45A bridge jacks ride on the runways and span the gap between them. Air/hydraulic operation lets a tech raise a vehicle's wheels off the runway for tire and brake service on the same lift the car is already parked on. Adjustable support arms fit lifts with 35" to 54½" between runways, so the jacks aren't tied to the PRO9000 — they work across most four-post platforms in that runway range.
Features
Atlas Garage PRO9000 four-post lift
9,000-lb lifting capacity
Free-standing, portable design — no anchoring required
Lock ladder, single-point lock release, and metal-braided hydraulic hose.Nylon rollers for smooth movement; steel wheel for durability.
RJ-45A rolling bridge jacks (×2 included)
4,500-lb lifting capacity per jack
Air/hydraulic operation (external air supply not included)
Two locking heights: 7⅜" and 10½"
Max lifting height with adapters: 18½" (may vary by lift)
Min height above runway: 3¾" (may vary by lift)
Arm adjustment: 39½" to 64¾"
Fits lifts with 35" to 54½" between runways
Height adapters and rubber lift pads included
Max lifting height with adapters: 18½". Two locking positions.Includes a 4-piece truck adapter set with on-board holder.Adapter kit: 4¾" rubber pad, two 1⅜" lift pads, two 1¼" adapters, two 5" adapters.
What's Included
(1) Atlas Garage PRO9000 four-post lift with 110V power unit
(2) RJ-45A rolling bridge jacks with adapter kits
Caster kit with polyurethane wheels (lift)
Steel approach ramps
Steel jack tray
4 plastic drip trays
2 rubber wheel chocks
Included caster kit. Do not move the lift with a vehicle on the runway.Diamond-plate steel approach ramps (31" × 31½" × 19⅞").Four plastic drip trays sit between the runways (39" × 24" each).Rubber wheel chocks (6" × 5½" × 3¼"), two included.
95¾" (7'11¾"), ±2" depending on thread adjustment and floor pitch
Top of runway
85" (7'1")
Clearance under runways
80½" (6'8½")
Overall length with approach ramps
227½" (18'11½")
Overall length without ramps
204" (17')
Length between columns
184½" (15'4½")
Overall width with motor
131½" (10'11½")
Overall width without motor
123½" (10'3½")
Width between columns
110½" (9'2½")
Drive-through width
79" (6'7")
Runway width (inner)
19⅞"
Distance between runways (center-to-center)
35½"
Runway thickness
4¾"
Runway gauge
5 gauge (.2" / 1/5" / 5mm) steel
Column footprint
11½" × 11½" base plate; 7½" × 4½" column
Approach ramp
31" × 31½" × 19⅞"
Drip tray
39" × 24", four included
Wheel chock
6" × 5½" × 3¼", two included
Shipping crate
202¼" × 28¼" × 21½"
Shipping weight
2,300 lbs
Warranty
2-year structural / 1-year hydraulic, parts only
Atlas RJ-45A Rolling Bridge Jack Specifications (×2 included)
Lifting capacity (each)
4,500 lbs
Operation
Air/hydraulic (external air supply not included)
Max lifting height with adapters
18½"
Min height above runway
3¾"
Locking heights
7⅜" and 10½"
Arm adjustment range
39½" to 64¾"
Compatible runway spacing
35" to 54½" between runways
Shipping crate (each)
39½" × 23½" × 12½"
Shipping weight (each)
380 lbs
Heights may vary by lift.
Footprint & Dimensions
Top view: 110½" between columns, 97¼" drive-through, 19⅞" inner runway width.Side profile with a Silverado dually loaded: 95¾" tall, 227½" long.80½" of clearance under the runways with the 110V power unit on the column.Single-point lock release handle and 110V power unit, viewed from the front.80¼" below runway, 85" to top of runway.Steel jack tray sits between the runways: 39" × 4½".Column base plate: 11½" × 11½".RJ-45A arm width extension: 30" to 60½".
Logistics & Delivery
This combo ships freight in three crates: one for the lift and one for each RJ-45A bridge jack.
Our goal is for every customer to be totally satisfied with their purchase. If this isn't the case, let us know and we'll do our best to work with you to make it right.
Shipping
We will work quickly to ship your order as soon as possible. Once your order has shipped, you will receive an email with further information. Delivery times vary depending on your location.
Manufacturing
Our products are manufactured both locally and globally. We carefully select our manufacturing partners to ensure our products are high quality and a fair value.
