Atkinson GSCM- WIFI (Generator Start Control Module)

The GSCM (Generator Start Controller Module) is a microprocessor-based generator-starting controller that receives start commands from the 12-volt output from an OutBack FX inverter auxiliary relay, a user-supplied switch, an auxiliary relay in an inverter, a voltage controlled relay, a timer or any user-supplied contact closure. It automatically controls a gas/propane or diesel powered generator or pump, and is totally sealed for harsh environment operation.

The GSCM provides contact signal relays to start the engine and disconnect the starter when a minimum generator frequency output is measured. It monitors the generator operation, shutting it down if one of several fault conditions is detected. LEDs are flashed to indicate the cause of the shutdown. Manually resetting the GSCM removes the lockout and allows the generator to restart if called. The GSCM is powered by 12 to 24VDC from a battery bank and will start generators for 12 to 48V systems. For 48V systems the GSCM must be powered by a 24V-or-less tap on the 48V battery bank. The GSCM provides a 30-day exercise function which can be synchronized with a photovoltaic input to only start each 30-day period at the beginning of the solar charge day. 2-year limited warranty. Dimensions are 5.5" x 3.3" x 1.5".

The GSCM-Wifi is able to broadcast a Wireless 2.4GHz Wifi network that can be connected to with a phone or tablet in order to change the configuration settings.

It supports three types of 3 or 4 wire gas-generator control: momentary, maintained or key ignition. It automatically disconnects the starter when a minimum generator AC Hz output is measured. It has a adjustable crank time and over and under frequency shut down. The GSCM-Wifi is powered by 12 volts DC from the generator battery and can monitor the battery voltage and start the generator to charge its own battery. The GSCM-Wifi uses the generator AC output to know when the generator has stated and is running.

The GSCM-Wifi also includes a third relay contact that can be configured to do one of several functions. Some of the functions available are a glow-plug start timer, acting as a generator power switch, a manual choke control, generator priming control, and a load control(by way of external load transfer switch)

Dimensions: L: 5.5” x W: 3.5" x H: 2.0"