{"product_id":"schulz-7580vv30x-3-air-compressor","title":"Schulz Air Compressor 7580VV30X-3 7.5 HP 80 Gallon Two Stage","description":"\u003ch2\u003eSchulz V-Series 7580VV30X-3 7.5 HP 80-Gallon Two-Stage Air Compressor (460V)\u003c\/h2\u003e \u003cp\u003eOf the 80-gallon V-Series builds Schulz makes, this is the compact one. It occupies 39.3\" by 25.2\" of floor and weighs 565 lbs - noticeably less machine to move, and noticeably less floor given up, than the horizontal builds of the same pump. If the compressor has to live in a corner of a working bay rather than a plant room, that is the specification that decides it.\u003c\/p\u003e \u003cp\u003eIt is a 7.5 HP motor on 460V, three-phase, driving a solid cast-iron two-stage pump by belt into a vertical 80-gallon receiver rated to 175 PSI, with an after-cooler fitted as standard.\u003c\/p\u003e \u003ch3\u003eFlow: two figures to confirm before you order\u003c\/h3\u003e \u003cp\u003ePublished free-air delivery figures for this model differ. This page lists 29 CFM at 175 PSI; the manufacturer specification block we hold for the same model records a different figure at the same pressure. The gap is small, but flow is the number a compressor is actually bought on, so it is worth settling first.\u003c\/p\u003e \u003cp\u003eSize your tools against 29 CFM, the more conservative of the two figures we hold. \u003cstrong\u003eIf your tool list sits close enough to that ceiling that the difference matters - a cabinet blaster, a high-volume sander, two techs on air at once - contact us before ordering and we will get the delivery figure confirmed by Schulz in writing.\u003c\/strong\u003e That question is far better answered now than after a freight shipment.\u003c\/p\u003e \u003ch3\u003eWill it fit?\u003c\/h3\u003e \u003cp\u003ePlan area is 39.3\" by 25.2\" and overall height is 74.8\". That height is the number to check, because it is what a vertical tank costs you: it is above a standard interior door opening, so the machine does not walk in upright through an ordinary doorway. It comes in through a roller door, or tilted on a pallet along a route you have measured first. Underneath the ceiling itself, watch for door tracks and springs, ducting, a lighting run or a mezzanine underside.\u003c\/p\u003e \u003cp\u003eAt 565 lbs it is the most manageable of this family on a pallet jack, but it is still far past what people can push around by hand, and a tall load is easier to tip than a long one. Set it on a flat, level slab, back it to a wall, and leave yourself access to the sight glass, the belt guard and the tank drain at the base of the column.\u003c\/p\u003e \u003cp\u003eEstablishing that 460V, three-phase supply is available at the intended position - and having the circuit sized and installed by a certified electrician, which is exactly where Schulz refers both the amp draw and the recommended breaker - remains the buyer's responsibility.\u003c\/p\u003e \u003ch3\u003eWhy the after-cooler matters more on a small tank\u003c\/h3\u003e \u003cp\u003eAn after-cooler chills the air on its way out of the pump so the water it is carrying condenses at the compressor, where the tank drain can remove it, instead of downstream in your hose. That is useful on any machine. It is particularly useful here, because a smaller receiver gives hot air less dwell time to cool and drop its moisture on its own; the after-cooler does deliberately what a large tank does slowly. It is fitted as standard on this model.\u003c\/p\u003e \u003cp\u003eWhat it does not do is dry the air. Everything leaving it is still saturated at its new temperature, so a run of cold pipe will still produce water. For spraying or instrument work, add a drop leg and a dryer downstream. There is no air dryer and no electronic drain valve on this unit, and the tank outlet is 1\/2\".\u003c\/p\u003e \u003ch3\u003eThe pump\u003c\/h3\u003e \u003cp\u003eTwo-stage compression does the work in two steps with cooling in between, which is what makes 175 PSI a sustainable working pressure rather than a peak. The block is solid cast iron in the V-cylinder layout with deep fins for heat rejection; the valves are Swedish steel, the main bearings oversized, the components CNC machined, and drive is by notched belts inside an enclosed guard. Lubrication is a splash system with an oil sight glass and no low-oil shutdown, so the oil level is checked by eye on a routine rather than watched by a sensor.\u003c\/p\u003e \u003ch3\u003ePerfect For\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eShops on 460V service with limited floor to spare.\u003c\/li\u003e \u003cli\u003ePlant rooms and utility corners where a long horizontal machine will not turn in.\u003c\/li\u003e \u003cli\u003eSecond compressors added to an existing three-phase system.\u003c\/li\u003e \u003cli\u003eFabrication and finishing work that needs cooled air at the tank.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eWhat is in the box\u003c\/h3\u003e \u003cp\u003eStrictly what the manufacturer lists: the compressor on an 80-gallon vertical receiver, a WEG electric motor, the V-Series solid cast-iron two-stage pump, an after-cooler, a magnetic starter, an inlet air filter, a pressure gauge, an oil sight glass, notched belts under an enclosed guard, and powder-coated components. Not included: air dryer, electronic drain valve, piping, filtration, hose, disconnect or installation.\u003c\/p\u003e \u003ch3\u003eSpecifications\u003c\/h3\u003e \u003ctable\u003e\u003ctbody\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eMotor\u003c\/th\u003e \u003ctd\u003eWEG electric, 7.5 HP\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eSupply\u003c\/th\u003e \u003ctd\u003e460V, three-phase\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eStarting\u003c\/th\u003e \u003ctd\u003eMagnetic starter\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eAmp draw and breaker\u003c\/th\u003e \u003ctd\u003eConsult a certified electrician\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003ePump\u003c\/th\u003e \u003ctd\u003eV-Series solid cast iron, two-stage, belt drive\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eDelivery\u003c\/th\u003e \u003ctd\u003e29 CFM at 175 PSI (see the note above)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eMaximum pressure\u003c\/th\u003e \u003ctd\u003e175 PSI\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eAfter-cooler\u003c\/th\u003e \u003ctd\u003eFitted\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eAir filter\u003c\/th\u003e \u003ctd\u003eFitted\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eLubrication\u003c\/th\u003e \u003ctd\u003eOil lubricated, splash, sight glass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eReceiver\u003c\/th\u003e \u003ctd\u003e80 gallon, vertical\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eTank outlet\u003c\/th\u003e \u003ctd\u003e1\/2\"\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eDepth\u003c\/th\u003e \u003ctd\u003e39.3\"\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eWidth\u003c\/th\u003e \u003ctd\u003e25.2\"\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eHeight\u003c\/th\u003e \u003ctd\u003e74.8\"\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e \u003ctd\u003e565 lbs\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\u003c\/table\u003e \u003ch3\u003eCertification, stated plainly\u003c\/h3\u003e \u003cp\u003eThe receiver and its safety valve carry the ASME pressure-vessel code stamp, and that is the certification this product claims. It is a real approval with a narrow scope: the vessel and the device that relieves it. It is not a third-party safety listing of the finished electrical assembly, and it is not something to show an electrical inspector in place of a compliant installation. If an insurer, a landlord or a customer contract names a particular listing for powered shop equipment, read that wording and check it against this machine before you buy, not afterwards.\u003c\/p\u003e \u003ch3\u003eShipping and delivery\u003c\/h3\u003e \u003cp\u003eFreight only, to the lower 48 states, quoted live at checkout once you enter a destination. The shipment is 565 lbs and travels upright on a pallet; the carrier delivers it to the truck tail and no further, so arrange a forklift or a dock, or choose terminal pickup and collect it yourself. Residential delivery is available with a residential fee added at checkout. Because tall loads shift, inspect this one before signing: look at the tank shell, the base ring, the guard and the gauge, photograph anything questionable, and note it on the bill of lading with the driver standing there. Schulz pickup is available in Acworth, GA. Call, text or chat with us - 866-774-7743.\u003c\/p\u003e \u003ch3\u003eWarranty\u003c\/h3\u003e \u003cp\u003eThe unit is warranted for 1 year and the pump for 2 years, whether the use is consumer or commercial. Open a claim before you open the machine: a pump that has already been dismantled generally falls outside the terms and leaves nothing to inspect. Take the serial number down on arrival, keep it with the invoice, and log the oil changes - a short written history resolves most warranty questions before they become disputes.\u003c\/p\u003e","brand":"Schulz of America","offers":[{"title":"460V","offer_id":54965115978067,"sku":"932.9342-0-460","price":1925.0,"currency_code":"GBP","in_stock":true},{"title":"208-230V","offer_id":54965116010835,"sku":"932.9342-0-208","price":1925.0,"currency_code":"GBP","in_stock":true}],"url":"https:\/\/progradewarehouse.com\/products\/schulz-7580vv30x-3-air-compressor","provider":"PRO GRADE WAREHOUSE","version":"1.0","type":"link"}