{"product_id":"nto-11a-two-post-auto-lift","title":"Triumph NTO-11A 11,000 lb Two-Post Auto Lift, Overhead Design with Truck Adapters","description":"\u003ch2\u003eDescription\u003c\/h2\u003e \u003cp\u003eThe \u003cstrong\u003eTriumph NTO-11A\u003c\/strong\u003e is an \u003cstrong\u003e11,000 lb commercial-grade two-post auto lift\u003c\/strong\u003e built around an overhead design that keeps the shop floor clear between the columns. With nothing to step over at floor level, you can roll a toolbox, transmission jack, or oil drain straight under a raised vehicle and work without obstruction. The overhead beam carries an automatic cut-off switch that stops the rise before a tall vehicle contacts the crossbar, so you do not damage the roof or the beam by lifting too far.\u003c\/p\u003e  \u003cp\u003eDirect-drive hydraulic cylinders move the carriages through smooth, even travel, and a pair of \u003cstrong\u003e3\/8-inch aircraft-grade synchronization cables\u003c\/strong\u003e keeps both sides rising together under load. A single-point safety release disengages the mechanical locks on both columns from one position. The lift handles vehicles from small cars up to large trucks, and a set of heavy-duty machined truck adapters is included so you can reach the lift points on taller frames.\u003c\/p\u003e  \u003cp\u003eEvery NTO-11A ships with its hydraulic power unit, mounting hardware, and the truck adapters needed to put it to work, backed by a \u003cstrong\u003e1-year parts warranty\u003c\/strong\u003e. It installs on a standard \u003cstrong\u003e4-inch, 3,000 PSI concrete slab\u003c\/strong\u003e and runs on \u003cstrong\u003e220V single-phase\u003c\/strong\u003e service.\u003c\/p\u003e  \u003cp\u003eBefore you order, measure your bay against the lift envelope. The NTO-11A stands \u003cstrong\u003e145 inches tall\u003c\/strong\u003e overall, spans 145 inches wide, and sets its columns \u003cstrong\u003e118 inches apart\u003c\/strong\u003e with a 108-inch drive-thru between the posts. The arms drop to a \u003cstrong\u003e4.5-inch lowered height\u003c\/strong\u003e to slide under low-clearance vehicles and raise to a \u003cstrong\u003e72-inch lifting height\u003c\/strong\u003e.\u003c\/p\u003e  \u003cfigure\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0771\/5550\/0318\/files\/nto-11a-two-post-auto-lift-dimensions.webp?v=1780762325\" alt=\"NTO-11A two-post lift dimensions: 145-in overall height, 118-in between posts, 72-in lift height, 4.5-in lowered\"\u003e   \u003cfigcaption\u003eNTO-11A clearance and footprint dimensions.\u003c\/figcaption\u003e \u003c\/figure\u003e  \u003ch2\u003eFeatures\u003c\/h2\u003e \u003cul\u003e   \u003cli\u003e \u003cstrong\u003eOverhead design\u003c\/strong\u003e — the drive structure sits up top, leaving the floor between the columns clear for tools, jacks, and drains.\u003c\/li\u003e   \u003cli\u003e \u003cstrong\u003eOverhead automatic cut-off switch\u003c\/strong\u003e — stops the rise before a tall vehicle reaches the crossbar.\u003c\/li\u003e   \u003cli\u003e \u003cstrong\u003eSingle-point safety release\u003c\/strong\u003e — disengages the column locks from one location.\u003c\/li\u003e   \u003cli\u003e \u003cstrong\u003eDirect-drive cylinders\u003c\/strong\u003e — deliver smooth, even lifting travel.\u003c\/li\u003e   \u003cli\u003e \u003cstrong\u003e3\/8-inch aircraft-grade synchronization cables\u003c\/strong\u003e — keep both carriages level under load.\u003c\/li\u003e   \u003cli\u003e \u003cstrong\u003eElectric safety cut-off\u003c\/strong\u003e — built into the lift control.\u003c\/li\u003e   \u003cli\u003e \u003cstrong\u003eMachined steel truck adapters included\u003c\/strong\u003e — stack to reach the lift points on trucks and taller frames.\u003c\/li\u003e \u003c\/ul\u003e  \u003cfigure\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0771\/5550\/0318\/files\/nto-11a-two-post-auto-lift-power-unit.webp?v=1780762326\" alt=\"Column-mounted power unit, single-phase motor, and red single-point lock-release handle\"\u003e   \u003cfigcaption\u003eColumn-mounted power unit and single-point lock release.\u003c\/figcaption\u003e \u003c\/figure\u003e  \u003cfigure\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0771\/5550\/0318\/files\/nto-11a-two-post-auto-lift-truck-adapter.webp?v=1780762325\" alt=\"Three machined steel stacking truck adapters beside the rubber lift pad on a swing arm\"\u003e   \u003cfigcaption\u003eStacking truck adapters included with the lift.\u003c\/figcaption\u003e \u003c\/figure\u003e  \u003ch2\u003eSpecifications\u003c\/h2\u003e \u003ctable\u003e   \u003ctr\u003e\u003cth colspan=\"2\"\u003eTriumph NTO-11A Specifications\u003c\/th\u003e\u003c\/tr\u003e   \u003ctr\u003e \u003ctd\u003eCapacity\u003c\/td\u003e \u003ctd\u003e11,000 lbs\u003c\/td\u003e \u003c\/tr\u003e   \u003ctr\u003e \u003ctd\u003eLifting Height\u003c\/td\u003e \u003ctd\u003e72\"\u003c\/td\u003e \u003c\/tr\u003e   \u003ctr\u003e \u003ctd\u003eOverall Height\u003c\/td\u003e \u003ctd\u003e145\"\u003c\/td\u003e \u003c\/tr\u003e   \u003ctr\u003e \u003ctd\u003eOverall Width\u003c\/td\u003e \u003ctd\u003e145\"\u003c\/td\u003e \u003c\/tr\u003e   \u003ctr\u003e \u003ctd\u003eDistance Between Posts\u003c\/td\u003e \u003ctd\u003e118\"\u003c\/td\u003e \u003c\/tr\u003e   \u003ctr\u003e \u003ctd\u003eDrive-Thru Width\u003c\/td\u003e \u003ctd\u003e108\"\u003c\/td\u003e \u003c\/tr\u003e   \u003ctr\u003e \u003ctd\u003eLowered Height\u003c\/td\u003e \u003ctd\u003e4.5\"\u003c\/td\u003e \u003c\/tr\u003e   \u003ctr\u003e \u003ctd\u003eBase Plate Size\u003c\/td\u003e \u003ctd\u003e18\" x 20\"\u003c\/td\u003e \u003c\/tr\u003e   \u003ctr\u003e \u003ctd\u003eLock Release\u003c\/td\u003e \u003ctd\u003eSingle-Point\u003c\/td\u003e \u003c\/tr\u003e   \u003ctr\u003e \u003ctd\u003eElectric Safety Cut-Off\u003c\/td\u003e \u003ctd\u003eYes\u003c\/td\u003e \u003c\/tr\u003e   \u003ctr\u003e \u003ctd\u003eLift Time\u003c\/td\u003e \u003ctd\u003e40 seconds\u003c\/td\u003e \u003c\/tr\u003e   \u003ctr\u003e \u003ctd\u003eVoltage\u003c\/td\u003e \u003ctd\u003e220V (single-phase)\u003c\/td\u003e \u003c\/tr\u003e   \u003ctr\u003e \u003ctd\u003eMotor\u003c\/td\u003e \u003ctd\u003e3 HP\u003c\/td\u003e \u003c\/tr\u003e   \u003ctr\u003e \u003ctd\u003eSynchronization\u003c\/td\u003e \u003ctd\u003e3\/8\" aircraft-grade cables\u003c\/td\u003e \u003c\/tr\u003e   \u003ctr\u003e \u003ctd\u003eTruck Adapters\u003c\/td\u003e \u003ctd\u003eIncluded\u003c\/td\u003e \u003c\/tr\u003e   \u003ctr\u003e \u003ctd\u003eStyle\u003c\/td\u003e \u003ctd\u003eOverhead\u003c\/td\u003e \u003c\/tr\u003e   \u003ctr\u003e\u003ctd colspan=\"2\"\u003e\u003cem\u003eRequires a minimum 4\" concrete slab rated at 3,000 PSI.\u003c\/em\u003e\u003c\/td\u003e\u003c\/tr\u003e \u003c\/table\u003e  \u003ch2\u003eWhat's Included\u003c\/h2\u003e \u003cul\u003e   \u003cli\u003eHydraulic power unit\u003c\/li\u003e   \u003cli\u003eSet of machined steel truck adapters\u003c\/li\u003e   \u003cli\u003eMounting and anchor hardware\u003c\/li\u003e   \u003cli\u003eNTO-11A installation manual\u003c\/li\u003e \u003c\/ul\u003e  \u003ch2\u003eWarranty\u003c\/h2\u003e \u003cp\u003eTriumph backs the NTO-11A with a \u003cstrong\u003e1-year parts warranty\u003c\/strong\u003e (parts only, no labor). If a covered part fails, you call MGS, we troubleshoot the problem by phone, and we ship the replacement part free with free ground shipping. Labor to install the replacement part is not covered. The hydraulic cylinders carry a full 30-day warranty, after which a seal kit is provided. Rubber lifting pads are not covered.\u003c\/p\u003e  \u003ch2\u003eFAQ\u003c\/h2\u003e \u003ch3\u003eWhat concrete does the NTO-11A require?\u003c\/h3\u003e \u003cp\u003eA minimum \u003cstrong\u003e4-inch concrete slab rated at 3,000 PSI\u003c\/strong\u003e. Anchor the columns into sound, level concrete that meets that spec.\u003c\/p\u003e  \u003ch3\u003eWhat electrical service does it need?\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003e220V single-phase\u003c\/strong\u003e power for the 3 HP motor. Confirm you have a 220V circuit at the install location before delivery.\u003c\/p\u003e  \u003ch3\u003eHow much ceiling height do I need?\u003c\/h3\u003e \u003cp\u003eThe lift stands \u003cstrong\u003e145 inches\u003c\/strong\u003e (about 12 feet) tall overall. Plan for at least that much clearance, plus headroom for the tallest vehicle you intend to raise on the arms.\u003c\/p\u003e  \u003ch3\u003eWill it work on low-clearance cars?\u003c\/h3\u003e \u003cp\u003eThe arms lower to a \u003cstrong\u003e4.5-inch\u003c\/strong\u003e collapsed pad height, low enough to slide under most cars before lifting.\u003c\/p\u003e  \u003ch3\u003eHow fast does it lift?\u003c\/h3\u003e \u003cp\u003eA full rise takes about \u003cstrong\u003e40 seconds\u003c\/strong\u003e.\u003c\/p\u003e  \u003ch3\u003eHow does the NTO-11A ship, and who unloads it?\u003c\/h3\u003e \u003cp\u003eThe lift ships by LTL freight on a 48-foot semi. The driver does not unload it and liftgate service is not available, so you will need a forklift, telehandler, tractor, or similar equipment to take the crated lift off the truck. You schedule the delivery appointment with the freight carrier directly. If your site cannot accept a semi, contact MGS at \u003ca href=\"mailto:sales@mygaragesupplies.com\"\u003esales@mygaragesupplies.com\u003c\/a\u003e or \u003ca href=\"tel:+13073811810\"\u003e307-381-1810\u003c\/a\u003e and we can route the shipment to your nearest freight terminal for pickup.\u003c\/p\u003e  \u003ch2\u003eDocuments\u003c\/h2\u003e \u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0771\/5550\/0318\/files\/nto-11a-two-post-auto-lift-installation-manual.pdf?v=1780762329\" target=\"_blank\" rel=\"noopener noreferrer\" aria-label=\"Download the Triumph NTO-11A installation manual, PDF, opens in new tab\"\u003eTriumph NTO-11A Installation Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Triumph","offers":[{"title":"Warehouse Pickup","offer_id":55049140633939,"sku":"NTO-11A","price":1704.0,"currency_code":"GBP","in_stock":true},{"title":"Ship to My Address","offer_id":55049140666707,"sku":"NTO-11A-S","price":1952.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1076\/9324\/4755\/files\/nto-11a-two-post-auto-lift-hero.webp?v=1790261010","url":"https:\/\/progradewarehouse.com\/products\/nto-11a-two-post-auto-lift","provider":"PRO GRADE WAREHOUSE","version":"1.0","type":"link"}