{"product_id":"bendpak-rj6w-6-000-lb-capacity-rolling-bridge-jack","title":"BendPak RJ6W 6,000-lb. Capacity Rolling Bridge Jack","description":"\u003cdiv class=\"divider\"\u003e\u003cimg alt=\"\" height=\"8\" src=\"https:\/\/cdn11.bigcommerce.com\/s-ew8kwapfc4\/images\/stencil\/original\/image-manager\/golden-bar.png?t=1681903157\" width=\"1198\"\u003e\u003c\/div\u003e \u003cdiv class=\"kd-main-product-feature-container\" id=\"kd-main-product-feature-container\"\u003e \u003cdiv class=\"panel\"\u003e \u003cdiv class=\"kd-product-feature-continer kd-flex-row-2\"\u003e \u003cdiv class=\"kd-prouduct-feature-item kd-prouduct-feature-content\"\u003e \u003ch3\u003eBendPak RJ6W Rolling Bridge Jack\u003c\/h3\u003e \u003cp\u003eAmong BendPak's rolling bridge jacks, the RJ6W is the one that gets out of the way. Its pads sit just 1.25\" (32 mm) above the runway when fully lowered — the lowest drive-over height in the W-series — which is what lets a low-stance car roll over the jack without a conversation about ramps and ground clearance. BendPak matches it to the XR-12000 Series, and it works with a full-size scissor lift or a four-post lift to raise the wheels clear of the runways.\u003c\/p\u003e \u003ch3\u003eThe safety margin is deliberate, and it has a limit\u003c\/h3\u003e \u003cp\u003eAn individual bridge jack is over-engineered relative to the load it normally sees. Used in the usual pair, the combined rating can be well over twice the weight of the car sitting on it. That is on purpose: the margin is there so that ordinary variation — a slightly off-centre pick-up, a vehicle heavier at one end than the spec sheet suggested, a technician working while the vehicle is up — never approaches the edge of what the equipment can do.\u003c\/p\u003e \u003cp\u003eThe limit is equally deliberate, and it is the one figure people talk themselves past. Margin belongs to the pair, not to a single unit. A jack must never be loaded past its own rated capacity, no matter how comfortable the two-jack total looks. If a single jack is taking an end that exceeds its rating, the correct answer is a bigger jack, not an optimistic reading of the arithmetic.\u003c\/p\u003e \u003ch3\u003eWill it fit your lift and your shop?\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eRunway rating.\u003c\/strong\u003e The easy-roll wheels are sized for the runway channels of standard four-post lift models rated 12,000 lbs of lifting capacity or greater; BendPak names the XR-12000 Series as the suitable lift. Check your own lift's rating and channel before ordering.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpan and reach.\u003c\/strong\u003e The support base adjusts from 36.25\" (921 mm) to 47.25\" (1,200 mm), and the arms reach from 42\" (1,067 mm) out to 56\" (1,422 mm). This is a wide adjustment range for a jack of this capacity, which is what makes it usable across a varied mix of vehicles rather than one bay's worth of them.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHeight, which is this jack's headline.\u003c\/strong\u003e Pad only: 1.25\" (32 mm) drive-over, rising to 12\" (305 mm). With the 2.75\" adapter: 4\" (102 mm) drive-over, rising to 14.75\" (375 mm). With the 5.5\" adapter: 6.75\" (171 mm) drive-over, rising to 17.5\" (445 mm). Note what the adapters actually cost you — every inch you add underneath is an inch of the vehicle's clearance you spend before the wheels leave the runway, so use the smallest stack that reaches the lift point.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAir, not power.\u003c\/strong\u003e There is no electrical requirement: a commercial-grade air-hydraulic pump is welded to the side of the unit and runs independently of your lift. The published air figures disagree, and we would rather show you both than pick one. The product information supplied with the jack asks for 125 psi and 10 - 20 CFM; the specification sheet for the same model states the air requirement as 125 PSI (10-25 CFM). The pressure agrees, the flow does not. Size against the higher flow figure if your compressor is marginal, or ask us to confirm it with the manufacturer first.\u003c\/p\u003e \u003cp\u003eConfirming the lift rating, the runway channel and your compressor's real delivered flow is the buyer's responsibility. We will check a combination with you before you order if you tell us the lift model.\u003c\/p\u003e \u003ch3\u003eRollers, and why hardened plating matters here\u003c\/h3\u003e \u003cp\u003eThe rollers are hardened stainless steel and zinc plated. On a jack this low, that specification does more work than usual: the roller assembly is close to the channel floor, which is where debris collects, and a roller that binds is one a technician will shove rather than guide. Hardened and plated, they glide along the runway under load and stay that way for years, so positioning stays a one-handed job.\u003c\/p\u003e \u003ch3\u003ePads that meet the frame where the manufacturer says to\u003c\/h3\u003e \u003cp\u003eDurable rubber contact pads are standard, and they adjust to engage the frame directly at the vehicle manufacturer's recommended lift point — which is the only point you should be lifting from, whatever looks convenient. For wide-bodied frames such as trucks and larger SUVs, frame cradle pads are sold separately and are close to a necessity rather than an accessory: they spread the load across the rail instead of concentrating it.\u003c\/p\u003e \u003ch3\u003eStackable adapters and three lock heights\u003c\/h3\u003e \u003cp\u003eSome undercarriages simply sit further away than others, so the adapters stack to extend the jack's effective reach upward. Three lock heights then let you park the vehicle where the work is comfortable. The locks engage automatically as the scissor arms rise and release together as they lower, so the load rests on steel rather than on hydraulic pressure, and a foot pedal on the unit runs the pump so the operator's hands stay on the job.\u003c\/p\u003e \u003ch3\u003ePerfect for\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e \u003cstrong\u003eShops with an XR-12000 Series or comparable 12,000 lb-rated platform\u003c\/strong\u003e that need wheel-free service from it.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eBays that see low-stance and modified cars\u003c\/strong\u003e, where a 1.25\" drive-over height is the difference between usable and not.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eGeneral service shops\u003c\/strong\u003e doing brake, hub and suspension work on a mixed vehicle list.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eHome garages with a full-size scissor or four-post lift\u003c\/strong\u003e and a project car that lives on it.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eWhat is in the box\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eThe RJ6W rolling bridge jack with easy-roll wheels\u003c\/li\u003e \u003cli\u003eA commercial-grade air-hydraulic pump welded to the unit, with foot-pedal control\u003c\/li\u003e \u003cli\u003eRubber contact pads\u003c\/li\u003e \u003cli\u003eStackable pad adapters\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eAn air-line kit is optional. Frame cradle pads for wide-bodied vehicles are sold separately.\u003c\/p\u003e \u003ch3\u003eSpecifications\u003c\/h3\u003e \u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth\u003eLifting capacity\u003c\/th\u003e \u003ctd\u003e6,000 lbs. (2,721 kg)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eSuitable lift models\u003c\/th\u003e \u003ctd\u003eXR-12000 Series\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eMinimum drive-over height\u003c\/th\u003e \u003ctd\u003ePad only 1.25\" (32 mm) · with 2.75\" adapter 4\" (102 mm) · with 5.5\" adapter 6.75\" (171 mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eMaximum lifting height\u003c\/th\u003e \u003ctd\u003ePad only 12\" (305 mm) · with 2.75\" adapter 14.75\" (375 mm) · with 5.5\" adapter 17.5\" (445 mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eSupport base width\u003c\/th\u003e \u003ctd\u003e36.25\" (921 mm) - 47.25\" (1,200 mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eArm reach\u003c\/th\u003e \u003ctd\u003e42\" (1,067 mm) minimum - 56\" (1,422 mm) maximum\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eTime to full rise\u003c\/th\u003e \u003ctd\u003e55 seconds\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003ePump\u003c\/th\u003e \u003ctd\u003eAir \/ hydraulic\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eMax. operating hydraulic pressure\u003c\/th\u003e \u003ctd\u003e3,370 PSI\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003ePower requirement\u003c\/th\u003e \u003ctd\u003eNone (air supply only)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eShipping weight\u003c\/th\u003e \u003ctd\u003e436 lbs. (193 kg)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eShipping dimensions\u003c\/th\u003e \u003ctd\u003e42\" x 24\" x 14\"\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e  \u003ch3\u003eCertification and compliance, stated honestly\u003c\/h3\u003e \u003cp\u003eThe product data we hold for this jack claims no third-party safety listing, and neither do we. Some insurers, fleet operators and local jurisdictions require equipment carrying a North American third-party safety listing — an independent test-house listing, which is a different document from a manufacturer's own declaration of conformity. If your insurer, your fleet policy or your local code sets that requirement, confirm what your paperwork asks for before you buy, and talk to us if you want help matching it to a product.\u003c\/p\u003e  \u003ch3\u003eShipping and delivery\u003c\/h3\u003e \u003cp\u003eA rolling bridge jack ships as freight to the lower 48 states, crated on a pallet. Unloading is the receiving end's job — a forklift, a dock and pallet jack, or a terminal collection you arrange instead. Delivery to a residential address is a different service from a commercial dock and carries a residential fee, quoted live at checkout rather than guessed at here.\u003c\/p\u003e \u003cp\u003eWalk the pallet before you sign. Check the crate, the pump housing and the roller assemblies, and write any damage on the bill of lading in the driver's presence — a clean signed bill is the carrier's evidence that it arrived intact.\u003c\/p\u003e \u003ch3\u003eWarranty\u003c\/h3\u003e \u003cp\u003eThe jack is covered by BendPak's published warranty document, which is what governs a claim; ask us for the current version before you order if the term matters to your decision. One condition is worth stating plainly: do not disassemble the pump, the cylinder or the lock mechanism before a claim is raised. An opened unit is usually outside the warranty by the time anyone looks at it, and the fault is exactly what the manufacturer needs to see intact.\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"divider\"\u003e\u003cimg alt=\"\" height=\"8\" src=\"https:\/\/cdn11.bigcommerce.com\/s-ew8kwapfc4\/images\/stencil\/original\/image-manager\/golden-bar.png?t=1681903157\" width=\"1198\"\u003e\u003c\/div\u003e \u003cdiv class=\"kd-main-product-details-container\" id=\"kd-main-product-details-container\"\u003e \u003ch3 class=\"h3 accordion\"\u003eProduct Features\u003c\/h3\u003e \u003cdiv class=\"panel\"\u003e \u003cdiv class=\"kd-product-feature-continer kd-flex-row-2\"\u003e \u003cdiv class=\"kd-prouduct-feature-item kd-prouduct-feature-content\"\u003e \u003cul\u003e \u003cli\u003e6,000-lb. lifting capacity\u003c\/li\u003e \u003cli\u003eEasy-Roll Wheels\u003c\/li\u003e \u003cli\u003eRubber contact pads\u003c\/li\u003e \u003cli\u003eStackable adapters\u003c\/li\u003e \u003cli\u003eHigh-pressure hydraulic power unit\u003c\/li\u003e \u003cli\u003eOptional air-line kit\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"divider\"\u003e\u003cimg alt=\"\" height=\"8\" src=\"https:\/\/cdn11.bigcommerce.com\/s-ew8kwapfc4\/images\/stencil\/original\/image-manager\/golden-bar.png?t=1681903157\" width=\"1198\"\u003e\u003c\/div\u003e   \u003cdiv class=\"kd-main-product-pickupdelivry-container\" id=\"kd-main-product-pickupdelivry-container\"\u003e \u003ch3 class=\"h3 accordion\"\u003ePick Up and Delivery\u003c\/h3\u003e \u003cdiv class=\"panel\"\u003e \u003cdiv class=\"kd-product-pickupdelivry-continer kd-flex-row\"\u003e \u003cdiv class=\"kd-prouduct-pickupdelivry-item\"\u003e \u003cp\u003eOur Pick Up locations for BendPak are located in Santa Paula, California \u0026amp; Theodore, Alabama.\u003cbr\u003e\u003cbr\u003eCall, text, or chat with us if you have questions. 866-774-7743\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"divider\"\u003e\u003cimg alt=\"\" height=\"8\" src=\"https:\/\/cdn11.bigcommerce.com\/s-ew8kwapfc4\/images\/stencil\/original\/image-manager\/golden-bar.png?t=1681903157\" width=\"1198\"\u003e\u003c\/div\u003e \u003cdiv class=\"kd-main-product-downloads-container\" id=\"kd-main-product-downloads-container\"\u003e\u003c\/div\u003e \u003cdiv class=\"divider\"\u003e\u003c\/div\u003e","brand":"BendPak","offers":[{"title":"Default Title","offer_id":54962115051859,"sku":"5175248","price":1269.0,"currency_code":"GBP","in_stock":true}],"url":"https:\/\/progradewarehouse.com\/products\/bendpak-rj6w-6-000-lb-capacity-rolling-bridge-jack","provider":"PRO GRADE WAREHOUSE","version":"1.0","type":"link"}